NT-D100R is just one kind of single channel video terminals, 1-channel audio,forward audio, backward audio and 1-channel data, forward data, backworddata are optinal.Product characteristics:1. 8/10 bit video signal digital sampling2. High-speed synchronous digital transmission technology3. Modular structure design (audio card and data card for optional configuration)4. Super optical dynamic range, no adjustment needed5. Status indication for power supply, optical signal and video6. No electromagnetic interference, radio frequency interference and groundcurrent7. Safe transmission guaranteed under poor electromagnetic environment8. BNC video connector9. FC optical connector10. Video DC recovery11. Maximum tolerable link loss for single mode fiber is 18dBTechnical indicators:Video characteristic:1. Video channel: 1 channel2. Video input/output impedance: BNC75 unbalanced interface3. Video input/output voltage: Typical peak-peak value1Vp-p4. Video bandwidth: 6.5MHz5. Video digital bit width: 8/10 bits6. Differential gain:7. Differential phase:8. SNR: >63dBData interface:1. Number of data channels: 1 channels2. Physical interface: the industry standard connecting terminal3. Rs-232 rate: DC 115.2Kbps4. RS-442/485 rate: DC 115.2Kbps5. RS-485 distance: 0 - 1200m6. Physical protocol: transparent support of RS-232/485/422/Manchester/Biphase protocolOptical interface:1. Physical interface: FC/ PC, (ST/ PC optional)2. Fiber type: single mode fiber, single fiber (multi-mode optional)3. Transmission distance: 0 - 2km for multi-mode4. Single mode: 0 - 100kmPower supply:Input voltage: AC 220V/DC +5VElectromagnetic compatibility:Radiation: EN50081-1, EN55022- B, CE, FCCMagnetic capacity: EN50130-4, EN50028-1Physical characteristic:1. Operating temperature: -25 + 70°C2. Humidity: 0 - 95% (no condensation)3. Induction: EN50130-5, 19954. Tidal fever: BS20115. Dimension: 95 x 72 x 27 (L x W x H), firmware for installation not included6. Weight: 0.48kg
Features:Advanced an compact design that perform E1 multiplexing and de-multiplexingand provides a 100Mbps optical interface in a single unitBuilt-in AC/DC or DC/DC converter and supervisory microproc
Features:Advanced an compact design that perform E1 multiplexing and de-multiplexingand provides a 100Mbps optical interface in a single unitBuilt-in AC/DC or DC/DC converter and supervisory microproc
The NT-16 media converter rack (2U) is a kind of cost-effective media converter rack to be used in an equipment room. It supports the insertion of a maximum of 16 different types of media converter mo
NT-D444-E is one kind of four-channel video + audio + data + Ethernet videooptical terminal, it is convenient for you to configurate the 8 channels with audiocard or data card, and bi-directional, bac
*NT240B+/NT480B+ adopts two integrated media converter modules operating in active/standby mode (optional);*Providing 4 to 16 E1 (2.048KB/S) interfaces and one wire speed 10/100M adaptive Ethernet int
NT-120 is suitable for the situations of high request reliability and assistantfunction, such as the specialized networks of mobile, electric power, army,police, highway and aviation. 4E1 PDH can prov
NT-D844-E is one kind of eight-channel V + A + D + E video optical terminal,it is convenient for you to configurate the 8 channels with audio card or datacard, and bi-directional, backward, forward ar
NT-240+ is suitable for the situations of high request reliability and assistantfunction, such as the specialized networks of mobile, electric power, army, police, highway and aviation. 8E1+100M PDH c
NT-2701 bridge, also called 2Mbps G.703 / Ethernet interface converter, isideal for the case where low-cost bridging is required. It also can be used as aLAN extension. When used as extension or segme
Так же в категории "Разъемы, соединители и контакты для электронных компонентов и детале":