Can be used low, middle and high load. When under high load, wear peformance degrades accordingly.Its a general-purpose product and be applied under low or high pressure, low or high temperature, and

Can be used low,middle and high load. When under high load, wear peformance degrades accordingly.Its a general-purpose product and be applied under low or high pressure, low or high temperature, and o

JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Thereforce it has a w

Fb092 bronze bushing is based on bronze cusn8.3p0.3 and evenly distributed drilling oil hole on itsbody. When in assembly, oil or grease should be stored in the holes before bushing is sealed from bot

Fb090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be in corporated with spherical of diamond shaped indentati

Jf-800 bimetal bushing is based on steel and sintered with cupb10sn10 as a lining layer. This type has the best performance within the range of cu-pb alloy constructured bushing. Thereforce it has a w

JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing.Thereforce it has a wi

1. Good load capacity and anti-wear.2. It is used in high load capacities and low speed with rotational, oscillating or frequent stop-start motion.3. It can work long time without oil in the condition

1.Dry or only a trace of grease or oil required maintenance free.2.Low friction and with long life.3.Low vibration,low noise and non-pollution in operation.4.Electroplating is possible to prevent corr