Engine displaceme: 55cc (3.4 cu-in)Peak HP: 3.1Bar length: 18" (45cm)/20" (50cm)Chain pitch: 3/8"Chain gauge: .050" (1.3mm)Max. no load speed R.P.M.: 11,500Speed in max. power R.P.

1) Combination of hammer and drilling modes2) Depth stop gauge3) Lock-on button for continuous operation

1) All ball and needle bearing construction2) Die cast aluminum gear housing3) Rocker switch

1) Standard spindle and spindle lock2) Side handle3) Double insulation

1) Input: 120V 3.75A (230V 800W)2) No load speed (rpm): 7,6003) Shaft diameter: 7/8" (2.2cm)4) Cutting width: 14" (350mm)5) Line size: 0.8" (1.65mm)6) Trigger type: on-off7) Lock off: N

Input: 230V, 840WNo load speed (RPM): high 14,500; low 12,000Air Velocity: 140 MPH (224km/h)Air Volume: 220 CFM (6.23m/min)Mulchin g ratio: NDust collector capacity (L): NSpeed control: two speedsBlow

1) Input: 220V 900W2) Peak HP: 1.53) Bar length: 14" (35cm) / 16" (40cm)4) No load cutting speed: 10m/s5) Trigger type: on/off6) Lock off: Y7) Toolless tension adjustment: N8) Chain brake: Y

1) Random, swirl-free polishing action2) Spiral-bevel gears3) 100% ball bearing variable speed

1) Rim: black, chrome and gold2) Housing: die cast aluminum, black paint3) Bulb: halogen, H3 12V 55W4) Lens: glass, laser or clearPacking:Pair packaging