|
|
Экструдер
Jiangsu Qili Forging and Pressing Machine Tool Co., Ltd is the professional manufacturer of horizontal metallic cold extruders and closed single-point presses of 600 KN, 2000 KN, 3150 KN and 5000 KN, which are widely used in production of aluminum capacitor bottles, aluminum bottles for chemical packing, pesticide packing & cosmetic packing, zinc battery cans, aluminum drinking bottles, automobile filter aluminum jar and cannonball shells etc.
|
| |
|
|
JA31-160C
JA31-160C closed-type single-point press is in the same series with JC31-250 and JA31-400A. This kind of machine tools is the general equipment and is suitable for cold pressing of plate materials, like blanking, bending, punching and shallow drawing, etc. The machine tool is generally the framework structure with good rigidity. Rails are installed at the four sides of the slide blocks, which ensure the good guiding precision. The grease cushion inside the slide blocks will prevent the machine tool from being damaged under the case of overload. The self-propelled electric control grease lubrication is adopted and a die cushion is designed inside the pedestal. A self-check infrared optical electric controller is installed in front of the machine body to ensure the operator`s safety. So the machine tool is featured with the advanced structure, reasonable design and easy operation.
|
| |
|
|
JA31-400A
JA31-400A closed-type single-point press is in the same series with JC31-160C and JA31-250. This kind of machine tools is the general equipment and is suitable for cold pressing of plate materials, like blanking, bending, punching and shallow drawing, etc. The machine tool is generally the framework structure with good rigidity. Rails are installed at the four sides of the slide blocks, which ensure the good guiding precision. The grease cushion inside the slide blocks will prevent the machine tool from being damaged under the case of overload. The self-propelled electric control grease lubrication is adopted and a die cushion is designed inside the pedestal. A self-check infrared optical electric controller is installed in front of the machine body to ensure the operator`s safety. So the machine tool is featured with the advanced structure, reasonable design and easy operation.
|
|
|
|
|
JB88-2000
Product Name: JB88-2000 Horizontal Toggle Metallic Extruder
Model Number: JB88-2000KN
Place of Origin: China
The 2000kN horizontal toggle metallic extruder is suitable for extrusion of non-ferrous
metal and is usually used for production of R20 zinc battery cans and in
the aluminum product enterprises which produce capacitor jars, aluminum bottles,
aluminum jars and aluminum tubes etc, whose diameters are less than Φ50. With
the automatic material feeding & discharging system and automatic circulation
& lubrication system installed, the extruder can give out products 75 times/min
according to the factors of the products` length, material & size, etc.
|
| |
|
|
JB88-3150 Горизонтальная Пуговица Металлический Экструдер
Product Name: JB88-3150 Horizontal Toggle Metallic Extruder
Model Number: JB88-3150KN
Place of Origin: China
The 3150kN horizontal toggle metallic extruder is suitable for extrusion of non-ferrous
metal and is usually used in production of aluminum capacitor jars, aluminum pesticide bottles, aluminum bottles for chemical packing, automobile filter shells, sports kettles, aluminum cosmetic bottles, cannonball shells, aluminum jars and aluminum tubes etc, whose diameters are less than Φ68. In addition, it can also be used in forging and material cutting, etc. The machine tool is the combined structure of toggle & crank shaft. The tool body is the cast steel structure, the clutch is the pneumatic multi-plate friction brake and the main driving motor is the high slip motor.
|
| |
|
|
JB88-5000 Горизонтальная Пуговица Металлический Экструдер
Product Name: JB88-5000 Horizontal Toggle Metallic Extruder
Model Number: JB88-5000 KN
Place of Origin: China
The 5000kN horizontal toggle metallic extruder is suitable for extrusion of non-ferrous
metal and is usually used in production of aluminum capacitor jars, aluminum pesticide
bottles, aluminum bottles for chemical packing, automobile filter shells,
sports kettles, aluminum cosmetic bottles, cannonball shells, aluminum jars and
aluminum tubes etc, whose diameters are more than Φ50 but less than Φ88.
In addition, it can also be used in forging and material cutting, etc. The machine
tool is the combined structure of toggle and crank shaft. The tool body is
the cast steel structure, the clutch is the pneumatic multi-plate friction brake
and the main driving motor is the high slip motor.
|
|
|
|
|
JB88-600 Горизонтальная Пуговица Металлический Экструдер
Product Name: JB88-600 Horizontal Toggle Metallic Extruder
Model Number: JB88-600KN
Place of Origin: China
The 600kN horizontal toggle metallic extruder is widely used for production of R6/R03
zinc battery cans, toothpaste shells, aluminum bottles, aluminum jars, zinc
cans, aluminum toothpaste tubes and medicine pots etc. It is featured with its
high speed (60 or 100 times/min), superior transmission & steadiness, less noise,
even & thick product wall and safe closed production.
|
| |
|
|
JC31-250
JC31-250 closed-type single-point press is in the same series with JC31-160C and JA31-400A. This kind of machine tools is the general equipment and is suitable for cold pressing of plate materials, like blanking, bending, punching and shallow drawing, etc. The machine tool is generally the framework structure with good rigidity. Rails are installed at the four sides of the slide blocks, which ensure the good guiding precision. The grease cushion inside the slide blocks will prevent the machine tool from being damaged under the case of overload. The self-propelled electric control grease lubrication is adopted and a die cushion is designed inside the pedestal. A self-check infrared optical electric controller is installed in front of the machine body to ensure the operator`s safety. So the machine tool is featured with the advanced structure, reasonable design and easy operation.
|
| |
|
|
JC88-2000
Product Name: JC88-2000 Horizontal Toggle Metallic Extruder
Model Number: JC88-2000KN
Place of Origin: China
The 2000kN horizontal toggle metallic extruder is suitable for extrusion of non-ferrous
metal and is usually used for production of R20 zinc battery cans (i.e. zinc
cans) and in the aluminum product enterprises which produce capacitor jars,
aluminum bottles, aluminum jars and aluminum tubes etc, whose diameters are less
than Φ50. With the automatic material feeding & discharging system and automatic
circulation & lubrication system installed, the extruder can give out products
60 or 85 times/min according to the factors of the products` length, material
& size, etc.
|
|
|
помощь
Добавить в избранное
Отложенные товары
Продукты
