Информация о производителе
|
.
Fan housing : - Material for size larger than 60x60x10mm is Thermoplastic UL 94V-0 PBT (30% Fiber) - Material for size equal or smaller than 60x60x10mm is Thermoplastic UL 94V-0 PBT (15% Fiber) Fan blade : - Material is Thermoplastic UL 94V-0 PBT (15% Fiber) Lead wire : - AWG # 28/30 for size equal or smaller than 40x40x8mm, 150mm length, material is UL approved - AWG # 26/28 for size between 40x40x10mm to 60x60x15mm, 300mm length, material is UL - approved - AWG # 24/26 for size between 60x60x25mm to 120x120x38mm, 300mm length, material is UL - approved Insulation resistance : - Minimum 10M at 500VDC between housing and both lead wires Dielectric strength : - Withstand 600VAC for one minute 1mA between housing and both lead wires Operating temperature : - X10 XC~+70 XC, high/low temperature test for 24 hours, temperature change: 30 XC/hour Storage temperature : - X40 XC~+70 XC, high/low temperature test for 24 hours, temperature change: 30 XC/hour Basic locked rotor protection : - no coil & board damaged Optional device : - Lock rotor protection with FG/RD signal output - Temperature sensor - Techometer output
|
336x280 banner
|
336x280 banner
|
|
помощь**
Добавить в избранное
Отложенные товары
