A pneumatically actuated valves, in which the instrumentation used in the air line is a directional control valve is performed by an air signal. Also used an inert gas as well as air fluid. Kaneko Air

A pneumatically actuated valves, in which the instrumentation used in the air line is a directional control valve is performed by an air signal. Also used an inert gas as well as air fluid. Kaneko Air

Feature Being air-operated, the valves can be used with assurance in places inaccessible to power sources or in dangerous atmospheres where electricity cannot be used. Standard specification FLUID CLE

Feature Emergency valves that are set by introducing signal air pressure and pushing a palm button. In an emergency case, when signal air pressure disappears, the valve changes its operating position

Feature As pilot pressure is well balanced with main pressure, the valves operate accurately. Standard specification FLUID CLEAN AIR FLUID TEMPERATURE -20 ～ 60℃ WORKING PRESSURE 0.1 ～ 0.99MPa PI

A pneumatically actuated valves, in which the instrumentation used in the air line is a directional control valve is performed by an air signal. Also used an inert gas as well as air fluid. Kaneko Air

M20 SERIES Feature ▪ Mass flow rate can be obtained even in a small size. (Cv value:Up to 12.6) ▪ Mounting orientation freedom. (360 ℃) Precautions ▪ For pilot-operated, should be able to e

M22 SERIES Feature ▪ Since the pilot valve diaphragm and directly, you can use 0 or differential pressure. ▪ Ⅱ B + H2T6 Exd explosion-proof explosion-proof test in Japan. It is available in a

Feature ▪ Pilot valve and main valve because it directly, you can use 0 or differential pressure. ▪ For the same seat diameter and small diameter pressure loss is known. ▪ We also manufacture