It is acceptable for the most 16 sets of different Media Converter Cards within a rack-mountable chassis which is supplied with unified power. Installing at the center of network, it can not only reduce the links, simplify the structure, but also ease for management and maintenance.HD -RACK can be tidily placed at any network environment. The external form of RACK is simple and tidy. It is ready for 10/100Mbps, 10/100/1000Mbps Converter Card to be plugged in, and will be the best solution of network connections for the continuous development of network. Main features◆The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend. When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK.◆Supplying the converters or powers to be plugged and played.◆2U high: 19 inch standard design◆It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance. Technical Specifications◆Capacity: 16 slots available. Every 10/100M Converter Card occupies one slot, every 10/100/1000M Converter Card occupies two slots.◆Power input : AC 100~260V,50~60Hz; output：DC +5V 12A◆Vein: ≤50mv◆Noise：≤50mv◆Power protection: protection from over voltage, over current and short circuit◆Ambient temperature：0 ～ +50℃◆Storage temperature：-20℃～70℃◆Humidity：5% ～ 90%◆Dimensions: 485(wide) x 245(length) x 90(high) mm Converter Card Optical Technical InformationModelFiberrateWavelengthdistanceTX PowerSensitivityLink BudgetHD -DMRmultimode10/100M850 /1310nm2km-20～-12dBm-30dBm10dBmHD -DSR-25singlemode10/100M1310nm25km-15～-8dBm-32dBm17dBmHD -DSR-40singlemode10/100M1310nm40km-8～-3dBm-35dBm27dBmHD -GMRmultimode10/100/1000M850nm224m/ 550m-11～-5dBm-18dBm7dBmHD -GSR -20singlemode10/100/1000M1310nm20km-9～-3dBm-22dBm13dBm
1.Widely used in Fiber to the Home (FTTH) 2.Assembly quickly 3.Operately easy and simpleFast fiber connector is used for field-assembled optical fiber connector, widely used in fiber to the
Features:Applicable for wall-mounted installationEasy to be locked and can open repeatedly by the keyCan be used both indoor and outdoorSuit for SC simplex adaptersCan be used both indoor and outdoorM
ITEMTechnical ParametersApplicable for3.1 x 2.0 mm Drop cable & indoor cableOptical fiber diameter125μm ( 652 & 657 )Tight buffer diameter (μm）250μm & 900μmFiber mode&nb
ITEMTechnical ParametersApplicable for3.1 x 2.0 mm Drop cable & indoor cableOptical fiber diameter125μm ( 652 & 657 )Tight buffer diameter (μm）250μm & 900μmFiber mode&nb
Suitable for the installation of fibre units containing between 1 and 12 fibres as well as minicable (24-144 fibres) in 5mm, 7mm, 10mm and 12mm microduct diameters the bundles can contain up to 24 ind
Suitable for the installation of fibre units containing between 1 and 12 fibres as well as minicable (24-144 fibres) in 5mm, 7mm, 10mm and 12mm microduct diameters the bundles can contain up to 24 ind
To keep MicroDuct networks free of debris, seal the system with Push-Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the MicroDuct into the E
The Push-Fit Reducers make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the coupling. No tools are required. The reducers can be connected and disconnected 10 times
The Push-Fit Connectors make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the coupling. No tools are required. The coupler can be connected and disconnected 10 times
Так же в категории "Прочее телекоммуникационное оборудование и аксессуары":
помощь**
Добавить в избранное
Отложенные товары
