Адрес: Side of Chenggui Road, Miaopuchang, Xin'an Village, East Zone, Zhongshan, Guangdong, China (Mainland) Zip: 528403
Телефон: +86-760-8237009
.
Product Name: CNC Evaporator BenderModel Number: EPBM-300/3G-CPlace of Origin: ChinaUse: used to bend evaporators at an angle and make them change "L" shape, "U" shape or "G" shape to fulfill overall design in air conditioner and the requirement of product techniqueFeature:1) Three axes CNC, accurately locate, steadily bend2) High automation degree, convenient adjustment3) The fines do not fall easily4) To replace bending radius convenientlySpecifications:1) Thickness of coil: 12.7mm/ layer, max. 3 layer, numerical setting2) Bending radius: R120, lining radius of coil (can be made according to order)3) Bending angle: 0-120 degrees, CNC4) Once feeding length: 600mm5) Precision: bend±0.1°, feed±0.1mm6) Locating length of coil: 200mm-600mm pre-location7) Controlling mode: jog, manual, auto8) Max. width of coil: 300mm/400mm9) Max. length of coil: 2,000mm10) Cycle of auto working: each bend/12-15S11) Air pressure range 0.3-0.5MPa12) Power supply: three phase four wire AC 415V 50Hz13) Total power: 4.5kW14) Gross weight of machine: 1,200kg
Features:1) Three axes CNC, pneumatic clamping2) Table format program, convenient operation3) Exquisite appearance, good machining technologyCNC system:1) Standard type: 7" color screen, integrat
Use: 3D molding of various tube. Widely applied to air-condition, engine and furnitureFeatures:1) Three axes CNC, hydraulic clamping, integrative oil-tank2) Feeding is driven by gear and rack. All axe
Product Name: CNC Pipe BenderModel Number: TBM30/35/40Place of Origin: ChinaUse: 3D molding of various tube. Widely applied to air-condition, engine and furnitureFeatures:1) Three axes CNC, hydraulic
Product Name: CNC Pipe BenderModel Number: TBM15/20/25Place of Origin: ChinaFeatures:1) Three axes CNC, pneumatic clamping2) Table format program, convenient operation3) Exquisite appearance, good mac
Use: this equipment is used for punching and flanging of copper pipe and makes the pipe look like a flute. It is mainly applied in the business of air-condition tubing.Features:1) Servo feeding, hydra
Product Name: CNC Punching Machine of Flute PipeModel Number: TDM16-1500BPlace of Origin: ChinaUse: this equipment is used for punching and flanging of copper pipe and makes the pipe look like a flute
Use: this equipment is used for metal pipe-end shrinking. It is mainly applied to the machining of air-condition, water heater, refrigerator and automobiles reservoir, drying bottles as well as muffle
Product Name: CNC Spinning MachineModel Number: TE1M40Place of Origin: ChinaUse: this equipment is used for metal pipe-end shrinking. It is mainly applied to the machining of air-condition, water heat
Use: the equipment is used for opening, straightening, chipless cutting and bending coil copper pipe into set length U shape pipe which is also called hairpin pipe; mainly applied to the auto producti
Так же в категории "Металлообрабатывающие станки":
помощь**
Добавить в избранное
Отложенные товары
