Feature As pilot pressure is well balanced with main pressure, the valves operate accurately. Standard specification FLUID CLEAN AIR FLUID TEMPERATURE -20 ～ 60℃ WORKING PRESSURE 0.1 ～ 0.99MPa PI

A pneumatically actuated valves, in which the instrumentation used in the air line is a directional control valve is performed by an air signal. Also used an inert gas as well as air fluid. Kaneko Air

M20 SERIES Feature ▪ Mass flow rate can be obtained even in a small size. (Cv value:Up to 12.6) ▪ Mounting orientation freedom. (360 ℃) Precautions ▪ For pilot-operated, should be able to e

M22 SERIES Feature ▪ Since the pilot valve diaphragm and directly, you can use 0 or differential pressure. ▪ Ⅱ B + H2T6 Exd explosion-proof explosion-proof test in Japan. It is available in a

Feature ▪ Pilot valve and main valve because it directly, you can use 0 or differential pressure. ▪ For the same seat diameter and small diameter pressure loss is known. ▪ We also manufacture

Coated with hard anodized aluminum, inner sliding parts can slide very easily and work with no oil lubrication during operation, without sticking and slipping, and are excellent in wear resistance. Co

Feature Wide range of applications. Can be used for a wider range of applications because valve sizes from 3/8″ to 1-1/4″ are available. Manual check is possible. Manual operation is possible. Thi

A pneumatically actuated valves, in which the instrumentation used in the air line is a directional control valve is performed by an air signal. Also used an inert gas as well as air fluid. Kaneko Air

Feature Can be used even with a pressure differential of zero as main and pilot valves are directly connected to each other. Pressure losses are small as nominal size is equal to seat size. Products c