In photography, a lens hood or lens shade is a device used on the end of a lens to block the sun or other light source in order to prevent glare and lens flare.The geometry of the lens hood can vary from a plain cylindrical or conical section (much like a lamp shade) to a more complex shape, sometimes called a petal, tulip, or flower hood. These more complex shapes of lens hood take into account the final image's shape and aspect ratio.[3] This allows the lens hood to block stray light with the higher portions of the lens hood, while allowing more light into the corners of the image through the lowered portions of the hood, thereby reducing the amount of vignetting in the final image.Ideally, lens hoods should increase in length, and therefore in efficiency, as the focal length of the lens increases and the angle of view reduces. Lens hoods are more prominent in long focus lenses because they have a smaller viewing angle than that of wide-angle lenses. For wide angle lenses, the length of the hood (away from the end of the lens) cannot be as long as those for telephoto lenses, as a longer hood would enter the wider field of view of the lens.VY Optics could manufacture varied size of lens hood or lens shade,picture shown is 37mm.OEM is available,too.All lens hoods are fit for Canon,Nikon,Olympus,JVC,Kadak,Fuji,Casio and so on.
Adapter ring is used between camera(or projector) and lenses,it could mount kinds of conversion lenses,such as telephot lens,wide angle lens,fisheye lens,and so on.Adapter rings are labeled from
The dome lens/hemisphere dome we manufactured be used to protect the lens of underwater camera,which could resist the pressure of water,and give a best view field to catch picture.Specification of hem
Dove Prism is ideal for image rotation. Dove prisms create an image inversion in a beam input parallel to the base.VY Optics Photoelectric Technology Co.,Ltd. can supply each kind size and each kind d
Cylindrical lens is used to correct astigmatism in the eye, and, in rangefinders, to produce astigmatism, stretching a point of light into a line.They are available in either plano concave or plano co
Corner Cube Retroreflector is always used to reflect the beam entering the prism face, regardless of its orientation to the beam. Corner cubes are widely used where precision alignment is difficult.Sp
Telephoto lens has a narrower angle of view,it thus gives apparent magnification to objects,it also seems to compress distant things, and there is less depth of field. The most obvious is to allow pho
Lithium Niobate(LiNbO3) Crystal lens is widely used as frequency doublers for wavelength > 1 mm and optical parametric oscillators (OPOs) pumped at 1064 nm as well as quasi-phase-matched (QPM) devices
Projection lens for medical equipment,pocket projectorWe manufacture and design kinds of projector lens as requirement,not only include short focal length fisheye lens/wide angle lens for Sanyo/Sony p
Beamsplitter Cube is a more sophisticated type consisting of two right- angle prisms cemented together at their hypotenuse faces. The cemented face of one prism is coated. Before cementing, with a met
Aide
Ajouter á l'élu
Les marchandises remises
