Hipot TesterInstructionThe 2672A is a high-precision hipot tester with warning function. The tester’s output voltage, current and timing are for digital display. And it’s a necessary equipment for electric safety test of all kinds electric appliances.2. Operation condition:Environment Temperature: 0~40°CRelative Humidity: ≤75%Atmospheric Pressure: 101.25KPaTechnical IndexOutput Voltage: AC/DC: 0-5KV; ±5%Output VoltageAC/DC: 0-5KV; ±5%Current test range & accuracyAC/DC two ranges2mA: AC/DC test range: 0.030 ~ 1.999mA, ±5%20mA: AC/DC test range: 2.00mA ~ 19.99/10.00mA, ±5%Current preset rangeWarning accuracy0.03mA ~ 19.99mA±5%Transformer capacity500VAOutput voltage waveform50Hz sine waveTest time & accuracy1 ~ 99s,±5%, or manual testVolume320*270*180mmN.W.10KGPower supplyAC: 220V±10%; 50Hz ± 2HzCurrent test range & accuracy: 2mA: AC/DC test range: 0.030 ~ 1.999mA, ±5%20mA: AC/DC test range: 2.00mA ~ 19.99/10.00mA, ±5%Current preset range: 0.03mA ~ 19.99mAWarning accuracy: ±5%Transformer capacity: 500VAOutput voltage waveform: 50Hz sine waveTest time & accuracy: 1 ~ 99s,±5%, or manual testVolume: 320*270*180mmN.W.: 10KGAC: 220V±10%; 50Hz ± 2Hz
IEC60529 IP1X Test SphereThe IEC60529 IP1X Sphere Probe is intended to verify the basic protectiion against access to hazardous parts. It's also used to verify the protection against access w
IEC60529 IP2X Test Finger
This Hinged Test Finger Probe is a precision test probe made according to IEC60529 and is used to simulate a human finger to verify the basic protection against access to
IEC60529 IP3X 2.5mm Test Rod Purpose:The Test Rod is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access wit
IEC60529 IP3X 2.5mm Test Rod Purpose:The Test Rod is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access wit
The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the
It's strickly designed according to IEC60529, GB4208, ect. It's used to test the waterproof performance of appliance and electric appliance with the rain protection function.
Needle Flame Tester according to IEC60695-2-2 and IEC60695-11-5According to IEC60695-2-2 and IEC60695-11-5, ZY-3 Needle Flame Tester is applied in the production and quality control department of ligh
Spring Hammer Impact Introduction:The spring Hammer consists of three principal parts: the body, the striking element and the release system.It's used to test the mechanical integrity of product e