RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620

L'anglais

Le Russe

L'allemand |

Aide

Ajouter á l'élu

Les marchandises remises

Description du produit

Composantes Électroniques & Parties / Composantes & le Matériel des Electro-mise-au-point / Accessoires de Composantes Électroniques /

RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 ()

Agrandir l'image

plus de détails sur le service

Information sur le fabricant

Société :
Jinmuyu Electronics Co., Ltd

Adresse :
Room 132, Building 16, Tian Qiao Wan, XinHua North Road, TongZhou District

Téléphone :
+86-010-69559637

.

JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY620 adopts surface mount installation form. Small size is a major feature of JMY620. JMY620 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY620 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8. Qualifications: • PCD: NXP MF RC522, NXP MF RC523• Working frequency: 13.56MHz• RF standard: ISO14443A, ISO14443B• Operating distance: 100mm(depending on card and antenna design)• Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only• Auto detecting card: Supported, default OFF; Can be set• Interface: IIC, UART(selected by SPS pin, recommend to use IIC)• Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps• Max.command length: 511 Bytes• Interface level: 3.3V (TTL level; 5V tolerance)• Power supply: DC 3.3V + 5V(±0.5V)• Power consumption: Working mode:80mA; Idle:100uA• Dimension: 22mm×35mm• Package: Surface Mount• Weight: about 10g• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)• ISP: Supported • RoHS: Complianthttp://www.jinmuyu.com/hf-rfid-modules/jmy620.html

Réserver un produit

Site du fabricant

D'autres marchandises de ce producteur :


	JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The des


	JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The desi


	JMY611 series are RFID reader/writer module which have various functions and support multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent


	JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxia


	JMY607 series are RFID reader/writer module with IIC or UART serial ports. JMY607 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers.


	JMY604 series are RFID reader/writer module with UART serial ports. JMY604 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. T


	JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module


	JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers.


	JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. Th

�� "Accessoires de Composantes Électroniques":

Régles de la ressource

eHouseHolding.com