Gland Sleeve Limited Expansion Joint
Material: Carbon Steel,QT450-10,Q235A,20#,35#
Size: 65-4000CM
Installation method:
SSJB-3 Gland Limited Sleeve expansion joint is adequate for welding into a pipeline on both sides.
You should loose the gland nut before installation and adjust the joint to the fitting length, then
weld the two pipe nipples into the pipeline. At last, screw down the nut evenly and diagonally and
adjust the screwed retaining ring.
Clamped Stainless Steel Sight Glass
Connection Type: Welding Type
Norminal Pressure:0.6-2.5MPa
Size: 1-4"
Body Material: SUS304, SUS316, SUS304L, SUS316L
Working Temperature: 0-200
Suitable
DIN Bolted Bonnet Cast Steel Check Valve
Characteristics and Design Description: S Pattern Body Design, BB Bolted Bonnet, renewable seat rings
Structure: Swing Type and Lift Type
A
Double Eccentric Butterfly Valve
Connection Type: Flange Type
Operated Manner:Worm Gear, handle, Operation: Lever, Gear, Electric actuator, Pneumatic actuator
Design and Manufacture Standard:API609
Double Flange Limited Telescopic Joint
B2F (VSSJA-2) double flange limited telescopic joint has the added limiting device based
on the original sleeve expansion joint. It lockup the pipe by
Double Flange Transmission Joint
Transmission joint is a novel device to connect pump, valve and etc to a pipeline by full-thread
bolts which make them a complete system with certain displac
Structure Type: Bidirectional Sealing Type
Connection Type: Wafer Type
Operated Manner: Electric Actuatorl
Design and Manufacture Standard: GB/T, ANSI, JIS, DIN
Norminal Pressure: 0.2-1.6MPa
Size
Expansion Joint
Material: As client's requirement
Dimension: Size, Diameter and Length can be produced as per client's requirements
Effect:
1) Gives a flexibility link, all