Adresse: Room 1206, Science Avenue 97, Luogang District
Telefon: +86-769-88888312
.
Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Strength≥2.5 (MPa)Break Elongation≥500 (%) Shear Strength≥2.0 (MPa)Hardness 45～55 (Shore A)The Temperature Range-60～200 (℃)Volume Resistivity2.6×1015 (Ω·CM)Dielectric Strength20 (kV/·mm)Dielectric Constant3.12Flame Retardant Grade UL94 HBSample: 300mL / tube, 25tubes / box. INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.3、Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.
1. Features ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola
Before The Curing Appearance Translucent And Half FlowRelative Density0.95～1.05 (g/cm3)Tack Free Time ≤90 (min)Completely Cure Time3～7(d)After the curing
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Stren
1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)
1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
Before the curingAppearanceWhite pasteRelative density1.60～1.70(g/cm3)Surface drying time≤15(min)After the curingTensile strength≥1.5（MPa） Elongation At Break≥150(%)Shear strength&
INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
