Adresse: No 99 qiansan rd,fenglinmei,Jimei District
Telefon: +86-592-5166561
.
NBR Nitril 40 Duro Solid and Hollow Rubber Balls
1,Compound from world class suppliers, NBR, EPDM, VITON (FKM), HNBR, etc material and pantone code available, hardness from 40 to 90 Shore A;
2, pressed by mould vulcanization, diameter from 2mm to 50mm,full grinding for the nice surface and meet BS standard.
3,RoHs/Reach certificate,
4, strict material traceability in ERP and barcode system.
NBR
Rubber Balls
Acrylonitrile
and butadiene unsatured copolymers
balls, they provide good wear/abrasion,
heat and
compression resistance. Excellent contact compatibility
with
plastics. Poor resistance to aging. They allow to get
closer
tolerances despite of the soft components. The
natural color of the balls is
black.
Applications
Safety pumps and valves (as sealing element), hydraulic and
pneumatic applications.
Corrosion Resistance
NBR balls are resistant in contact with hydraulic fluids,
lubricant oils, transmission fluids, not polar petroleum products, aliphatic
hydrocarbons, mineral greases, most diluted acids, basis and salt solutions at
room temperature. They are resisting even into air and water environments. They
are not resisting against aromatic and chlorinated hydrocarbons, polar
solvents, ozone, ketones, esters, aldehydes.
Nitrile rubber, also known as Buna-N, Perbunan, acrylonitrile butadiene rubber, and NBR, is a synthetic rubber copolymer
NBR rubber VA ring seal
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension of the
NBR rubber VE ring seal
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension of the
NBR rubber VE ring seal
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension of the
NBR rubber VL ring
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension o
NBR rubber VL ring seal
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension of the
NBR rubber VS ring seal
V-RING is a full rubber seal for rotary shafts. The V-Ring is normally stretched and mounted directly on the shaft, where it is positioned by the inherent tension of the
NBR rubber washer is mainly used for shock absorption application or seal the gap in the static fluid
Item name
o ring
Material
NBR,VITON,EPDM,SILICONE,HNBR,etc
Si
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
