New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.1) Cooling temperature range 5-35oC.2) High-capacity tube-in-shell evaporator with very good heat exchange performance especially for high ambient temperature condition.3) Tube-in-shell evaporater with excellent heat transfer and rapid cooling.4) Stainless steel warm-keeping water tank.5) R22 refrigerant to be used for efficient cooling.6) R407C environment-friendly refrigerant is optional to use.7) Overload protection for compressor, pump and blower.8) Independent temperature controller, anti-freeze protection.9) Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.10) Warm-keeping design for all piping to avoid partial convection.11) Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.   RCM-3WRCM-4WRCM-5WRCM-8WRCM-10WRCM-12.5WRCM-15WRCM-20WRCM-25WRCM-30WChilling capacitykw7.51013.52025.531.538.55062.577.5Kcal/hr650090001150016500220002700033000440005400066500Compressor output powerHP34581012.515202530Refrigerant-R22 R407CEvaporator-Plate typeCondenser-Plate typeCondenser in/out pipe diaminch1"1½"2"2½" Tank capacityL50100150180200280Pumping PowerKw0.751.12.22.2Pump Max flowrate L/min80150250400Pump Max pressurekg/cm22.0Chilled Water outletlnch1/2"*41½"2"2½" Chilled size intletlnch1/2"*41½" 2"2½" Overflow Portlnch1/2"Dimension WxLxHmm760*1250*980800*1280*1050850*1450*12501000*2000*1400WeightKg120140180220280350400450550600 Plesase excuse for not note if some specifications of products are changedNote: 1) The cooling capacity is measured when the outgoing water temperature is 12oC and ambient temperature is 30oC.2) The refrigerant can use R407.For coding,use "N".For example,RCM-10A-N.3) The stardard voltage is 3¢,380V,50Hz. We also can make it as your requirments.Product Images: Water-cooled Industrial Chiller
RAL series auto-loader uses stainless-steel hopper and high-efficient vaccum motor. It has motor overload protection device and auto-alarming device for material shortage,It is characterized with ligh
New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The
RAL series auto-loader uses stainless-steel hopper and high-efficient vaccum motor. It has motor overload protection device and auto-alarming device for material shortage,It is characterized with ligh
The hopper dryers of RDM series are quick-drying equipments for non-hygroscopic plastics and rubber.They can dry the humidified raw material caused by packing,transportation and retrieving.The equipme
The medium-speed beside-the-press granulators of RG-16 series are used together with plastics molding machine.It is designed to crushing various shorts,reuse and semi-finished products made of plastic
RTC series automatic mould temperature controller is mainly used for mould heating and keeping constant temperature,as well as for the fields with same requirement.This series adopts heat-exchanging p
The characters of the machine>Outside bearing seat design,in order to avoid the dust entering into the bearing ,long time using life.>Separation design for machine body,convenient for replacing the sc
Òàê æå â êàòåãîðèè "Das Kühlen und Klimatisierungsausrüstung":
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
