jmy506 iic i2c uart interface hf rfid reader and writer modules

English

Russe

Französische |

Hilfe

Zu Favoriten

Dem Warenkorb hinzugefügte Favoriten

Beschreibung der Ware

Elektronische Komponenten & Teile / Electro-Anpassung von Komponenten & Materialien / Elektronische Teilzusätze /

jmy506 iic i2c uart interface hf rfid reader and writer modules ()

Bild zu vergrössern

Ausführlicher über dienstleistung

Informationen über den produzenten

Firma:
Jinmuyu Electronics Co., Ltd

Adresse:
Room 132, Building 16, Tian Qiao Wan, XinHua North Road, TongZhou District

Telefon:
+86-010-69559637

.

JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: • PCD: NXP RC522, RC523• Working frequency: 13.56MHz• Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order• RF standard: ISO14443A, ISO14443B• Operating distance: 80mm(depending on card and antenna design)• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only• Auto detecting card: Supported, default OFF• EEPROM: 512 Bytes• Interface: IIC&UART(selected by SPS pin, recommend to use IIC)• Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps• Max.command length: 254 Bytes• Interface level: 3.3V(TTL level; 5V tolerance)• Power supply: DC 5.0V• Power consumption: 50mA• Dimension: 42mm×21mm×8mm• Package: DIP32• Weight: about 15g• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)• ISP: Supported• RoHS: Complianthttp://www.jinmuyu.com/hf-rfid-modules/jmy506.html

In den Warenkorb

Internetauftritt des Herstellers

Andere Waren dieses Produzenten :


	JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF pro


	JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it sup


	JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. Th


	JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader m


	JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned b


	JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The des


	JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The desi


	JMY611 series are RFID reader/writer module which have various functions and support multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent


	JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxia

�� "Elektronische Teilzusätze":

Nutzungsbestimmungen der Website"

eHouseHolding.com