Medical Orthopedic Fiberglass Casting Tape 1. DescriptionThe medical orthopedic fiberglass casting tape is made of fiberglass soaked with polyurethane,it'sa ideal succedaneum of plaster of paris,having lots of advantages over plaster of paris. 2. Features:1)Safe and ConfortableIt has small contractibility after becoming dried,will not cause discomfort of tickle,tightness and burn to the skin,not like plaster of paris which generates heat release after being wetted by water.2)High air permeabilityIt can avoid hot flash and pruritus to skin because of its good performance in air permeability3)Very short induration timeIt takes about 20 minutes for the full induration of casting tape,but 24 hours for plaster of paris.4)High hardness and light weightIt's 20 times harder than plaster of paris after induration,5 times lighter and 3 times thinner than plaster of paris.5)Excellent X-ray penetrationThere is no need to remove the casting tape to take a x-ray photo,it's easy to see the intention and recovery status of wound clearly by x-ray.6)Superior waterproofnessIts surface will be smooth after induration,its water absorption is 85% lower than the plaster of paris',it can contact the water directly,you can wear it to take a bath or SPA.7)Easy to useYou can soak it in water of normal temperature for 2-3 seconds and shove it for 2-3 times first,then wear it on the wound,or wear it first and then spray water on it.8)Good plasticityIt can be bended freely,suitable for many parts of the body. 3.Specification:1)Material: fiberglass+ polyurethane 2)Color:white/blue/green/red/yellow,purple,orange,etc.3)Width:2'',3'',4'',5'',6'' or as your requests4)Length:2.7m,3.6m 4. How To Use:1)Put on gloves and choose the casting tape of suitable size2)Use cotton coil or cotton slipcover as pad on the surgery position3)Open the package,take the casting tape out and soak it in water of normal temperature for 2-3 seconds and shove it for 2-3 times,take it out of the water and shove excess water out.4)Wind the casting tape and adjust the tightness as needs,wind 2-4 layers on non-weigh-bearing part and 2-6 layers on weight-bearing part.5)Finish the winding and shaping within 3-5 minutes induration time.it can bear weight after 20 minutes6)Remove it by electric plaster saw. 5. Package:1pcs/bag,10bags/box,12boxes/carton or as your requirements 6. Advantages:1)Certificates:CE/FDA/ISO13485/ISO90012) Famous Trademark Of China3)Small orders and OEM services available.
100% Cotton Medical Absorbent Cotton Wool RollThe medical absorbent cotton wool roll is made of 100% cotton,which is odorless,soft and has superior absorbency and good air permeability,can be used for
Disposable Nonwoven Clip Cap 1. Description:The disposable nonwoven clip cap is made of spunbond pp nonwoven fabric,whichis soft,non-toxic,eco-friendly,anti-static,dustproof,mothproof,has superio
Disposable Senior Adult Diaper With Blue ADL1. Description: The disposable senior adult diaper with blue ADL is made of absorbent nonwoven,tissue paer,fluff pulp,SAP,Cloth-like film and blue
Disposable Surgical Non-woven Doctor Cap With Tie 1. Description:The disposable surgical non-woven doctor cap with tie is made of spunbond pp nonwoven fabric,which is soft,non-toxic,eco-friendly,
Medical Absorbent Gauze Swab The medical absorbent gauze swab is made of 100% cotton,which is odorless,soft,having high absorbency & air permeability,can be widely used in surgical oper
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
