JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through RS232C interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability. Qualifications: • PCD: NXP RC531• Working frequency: 13.56MHz• RF standard: ISO14443A, ISO14443B• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only• Auto detecting card: Supported, default ON• SAM card slot: 4 slots, 9600bps--115200bps• EEPROM: 512 Bytes• Interface: RS232C• Communication rate: 19200--115200bps• Max.command length: 1024 Bytes• Interface level: 3.3V(TTL level; 5V tolerance)• Power supply: DC 5.0V• Power consumption: 150mA• Dimension: 80mm×60mm×12mm• Weight: about 50g• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)• ISP: Supported• RoHS: Compliant
JMY607 series are RFID reader/writer module with IIC or UART serial ports. JMY607 has various functions and supports multi ISO/IEC standard of contactless IC card; the
MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards acco
MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC c
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data by the way of simulation keyboard through USB inter
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display mo
JMY350 series are the popular type access card reader. The way of installation is 86 electrician-boxes. The interface is RS485 & Wiegand. There are LED status indicator and buzzer
JMY901 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC
JMY980 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various c
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reade
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
