Adresse: 2F Building,Block 6,Xin Yuan Industrial Zone,Xi Li Town,Nan Shan District
Telefon: +86-755-86501736
.
Detail The SC connectors used are small form-factor fiber optic connectors resembling miniature LC connectors with high quality 1.25mm zirconia ferrules and push-pull latching mechanism. They are fully compatible with existing SC hardware.In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard patch cords, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR-326 requirements.Other than standard single mode and multimode fibers, G655, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request.Features1. Small form factor design2. Pull-proof3. Non-optical disconnect performance4. High quality zirconia ferrules5. Materials meet RoHS requirements6. Riser, Plenum, and LSZH cables AvailableApplications1. Telecommunication2. Computer networks3. CATV networks4. Active device termination5. Instrumentation
Distribution fiber patch cable,MM,50/125um,10G OM3.on one hand with 12 SC connector with 0.9mm Jacket,on one hand with 12 SC connector with 2.0mm Jacket
The LC connectors used are small form-factor fiber optic connectors resembling miniature SC connectors with high quality 1.25mm zirconia ferrules and push-pull latching mechanism. They are fully compa
FeaturesSingle mode and multi mode (flat)APC(catercorner 8 degree angled)availableHigh fiber density (maximum 24 fibers for Multimode)Fiber in single connector: 4, 8, 12 24Insert/Pull latching connect
The FC connectors used in our patch cords are designed to FC standards with high quality zirconia ferrules and non-optical disconnect performance. They are fully compatible with existing FC hardware.I
The FC connectors used in our patch cords are designed to FC standards with high quality zirconia ferrules and non-optical disconnect performance. They are fully compatible with existing FC hardware.I
The SC connectors used for our patch cords are designed to SC standards and are fully compatible with existing SC hardware. Two simplex connectors can be configured into a duplex format by adding a du
Description Asion' MTRJ patch cords are designed to meet EIA/TIA 568B.3 and EIA/TIA 604 standards. These products offer excellent performance with high repeatability and lo
A fibre pigtail is a short fiber cable that has a optical connector on one end and a length of exposed fibre at the other end. This can be fusion spliced to one fibre of a multi-fiber trunk to enable
A fibre pigtail is a short fiber cable that has a optical connector on one end and a length of exposed fibre at the other end. This can be fusion spliced to one fibre of a multi-fiber trunk to enable
Òàê æå â êàòåãîðèè "Andere Fernmeldeausrüstung & Zusätze":
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
