Адрес: No.205, Lane 464,Sec.7,Chang Hsin Rd.,Shengang Hsiang, Changhua County, Taiwan 509, R.O.C.
Телефон: +886-4-7983177
.
Key Specifications/Special Features: Specification G 25 sets welding cylinders. 12 sets of transformer & 25 sets welding cylinders must be operated together, descending & welding simultaneously. The longitudinal & cross wires must be pre-cut. Cross wire loaded into rack, auto feed into welding position. The distance of cross wires is 20~250mm. Pitch of longitudinal wire:100~250mm. Diameter of wire: ?2~ ?6mm; ?6~ ?12mm Didth of mesh: 2400mm. Length of mesh: 10000mm Production capacity: Each wire requires 1.5 second to weld. Welding time is different subject to diameter of wire. This machine can be operated 20 hours continuously(It requires 12 sets transformers). *Construction of machine There are three major parts of machine G 1)Front-feed rack construction. 2)Middle-welding base. 3)Last-wire pulling by NC, feed rack for cross wires. 1)Front-feed rack construction: A.To load the pre-cut wires into V groove. There are 25 sets of clamping sets which can travel to the right and left. To clamp the wires by air cylinders. Each clamping set can be disengaged and installed quickly, it can also be adjusted according to the spec & sizes required. B.There is a 2500 mm guide way on both sides of feed rack, to push 25 sets of V grooves (for clamping the wires) to welding position. After complete the first row of wires, V grooves return to zero point. So the pre-loading can be started. This function is designed for increasing the production capacity. To drive by 2 HP reducing motor, speed adjusted by converter. C.All of the 25 wires are at welding position, cross wires loading automatically, then start welding. After first wires welded, welding cylinder is not ascending, all the clamping sets return to zero point quickly, then it continue welding automatically.
Key Specifications/Special Features: 80 KVA x 6 sets of transformers. Diameter of wire: ø2~ø6mm;ø6~ø10mm. Production capacity: 1.5 second/each wire. Size of mesh: W 1320 m
Key Specifications/Special Features: Welding cylinder 24 pcs. 6 sets transformer will work with 24 pcs cylinders press-dowm and welding. To feed cross wires into stacker, wires automatically loaded t
Specifications/Special Features: A Type Hydraulic drive is stable, can be adjusted for quick or slow performance, and will not easily break. High-precision linear slide-rail never needs adjustment,
Key Specifications/Special Features: High-precision digital key switch, IC control circuit, and PC board ensure long operational durability and high-accuracy performance. Cooled by dual-passage cooli
Key Specifications/Special Features: High-precision digital key switch, IC control circuit, and PC board ensure long operational durability and high-accuracy performance. Cooled by dual-passage cooli
(1) Multi-spot welding machine. The machine is automatic feeds and suitable for welding the steel of construction, racks and flat steel surfaces. (2)Hydraulic multi-spot welding machine for grid boar
помощь**
Добавить в избранное
Отложенные товары
