Информация о производителе
Компания: Apt Prosper Technology Co., Ltd. |
|
Адрес: 21G, Caihui Building, Caihong Xindu, South Caitian Road, Futian, Shenzhen, Guangdong, China (Mainland) Zip: 518026 |
|
Телефон: +86-755-82915951 |
|
.
Product Name: 100M WDM Media ConverterModel Number: APT-103WS36 / 56OCPlace of Origin: ChinaName: 10/100M self-adapt media converterType: APT-103WS36/56OCScale: 10/100M CWDM media converterAPT-103WS36/56OC single-fiber dual-direction fiber optic media converter: single-fiberdual-direction fiber optic media converter can be used Ethernets electricsignal to transmit photosignals photoelectricity signal transceiver. Adoptingone fiber cable can receive and transmit photosignal in-phase, enhance one doubletransmit energy than existing optical fiber, economize fiber cables source.APT-103WS36/56OC is a self-adapted single-fiber dual-direction fiber optic mediaconverter with 10/100M. Due to single-fiber dual-direction, media converters transmitphotosignal transmit wavelength and receive wavelength are different, must use bygermination, namely one TX and one RX. Dont use wrongly. Otherwise it cant workup to snuff.APT-103WS36/56OC single mode single-fibers transmit photosignal is wavelength1,550nm, receive photosignal is wavelength 1,310nm. Sing-fiber dual-direction mediaconverter have one RJ-45 interface and one SC single-fiber interface, separatefor use to connecting twisted-pair and fiber. Single-fiber media converter has6 LED indicators, power, TX100, FX100, FX Link/ACT, TX Link/ACT and FDX.Technical parameters:1. Complies with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.1q, 100Base-T, 100Base-TX, and 100Base-FX standards2. Supports TCP/IP, PPPOE, DHCP, ICMP and NAT protocol3. Flow control mode: full duplex adopt IEEE802.3X, half duplex adopt backpressuresstandard4. Electricity port support auto-negotiation function, autoregulation transmit modeand transmit speed5. Prot supply auto-MDI/MDIX automatic reverse6. Supports storage transmit mode7. Supports electricity ports 10M 100M mode or self-adapt modes switch8. Afford of state indicator, external power (output 5V 50Hz 1A)9. Interface: electric port: RJ-45, fiber port: SC10. Twisted-pair: CAT.5, CAT.611. Single mode fiber: 8/125, 8. 3/125, 9/125uM12. Working temperature: 0 ~ 50degree13. Storage temperature: -20 ~ 70degree14. Humidity: 5% ~ 90% (non-condensing)15. Size: 26 * 70 * 94mm (H * W * L)Specifications:1. Connect type: SC2. Fiber type: single mode3. Wavelengh: 1,310/1,550nm4. Typical distance: 60km5. Min. TX PWR: -18.0dBm6. Max. TX PWR: -8.0dbm7. Sensitivity:8. Link budget: 12. 0dBmNotes:1. Optical port working mode is 100M full duplex, LAN port is auto negotiation2. Twisted-pair interface initialization base to couple equipment state to set selfsstate. If cant test opponent state, that state is uncertainty3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when themedia converter is in electrifying state4. Please put dustproof cover on fiber interface, when the fiber optic media converteris not used5. When the product connecting with other equipment (router, switch, hub, NIC), theinterconnection equipments optical interfaces speed and mode must be consistent(multimode and single mode); interconnection equipments LAN ports speed shouldmismatch (100Base-TX/100Base-T)6. This product must be in gemination use; gemination media converters opticmodules transmit and receive part must use separate 1,310nm and 1,550nm wavelength
336x280 banner
|
336x280 banner
|
|