Three-phase Parallel Heat Tracing
Constant Wattage Heating Cable
Advantages:
1.Cut to
fit in the field.
2.Easily
controlled
3.Built in
cold length at every power connection
4.Wide
variety of wattage outputs
5Low cost
6.480 Volt
Cable available
7.Design
Temperatures up to 500 F
Cable Structure and Index:
Technical Data:
Cable construction
Twin conductor
Conductor
Solid heating core
Insulation
Fluoropolymer
Shield
Al foil and Cu wire
Protective jacket
PVC
Connector
Out splice
Outside diameter
5.0-5.8mm
Rated voltage
230VAC
Power output
12W/m 18W/m 20W/m
Resistance tolerance
+10/-5 %
Application :
Constant watt heating cable is mostly used in
pipeline, valve, pump, storage tank, reaction tower and instrument box to
prevent frostbite and preserve heat, or keep instruments technology
temperature. Detailed application is as following:
(1) Use for continuous flowing low-concretion pipeline in normal condition to
prevent medium from concretion for stopping flowing.
(2) Use for liquid pipeline requiring for controlling working temperature
strictly to trace heat and preserve heat.
(3) Use for water supply pipeline and valve in cold area to prevent frostbite,
as well as for drainpipe and condensing pipeline to prevent frostbite.
(4) Use for ocean platform pipeline to prevent frostbite.
(5) Use for common pipeline and instrument to trace heat and preserve heat.
(6) Use for oil extraction to trace heat (replacing water jacket), or sewage
well to trace heat.
(7) Use for airport runway to prevent snow from freezing.
(8) Use for concrete product to prevent frostbite.
Installation Notes
1) Don't
damage cable. The bend radius should be more than 6 times of thickness of
cable.
2) Well
installation can guarantee the efficiency. Use nylon cable ties to fix heat
cables.
3) Add an
aluminum tape between the pipe and the heat cables if the Pipe is non-metallic.
4) After
the installation, take a full test and make sure the system works well.
5) Heat
insulation materials should be dry and the joint of cable should be sealed.
6) Make a
mark on the outer protective layer of the pipe.
7) The
junction box should be sealed to prevent rainwater.
8) For
explosion-proof products, the metal jacket should connected to the terminal.
9)
Protective sleeve must not be damaged during installation, and the core wire
can not bare.
Detail Description
Introduction
1.Urea formaldehyde molding powder,as a main variety of aminoplastic molding material,is a kind of chemical produ
Main functions and features
This machine is used for the milling process of the H-barand box beam, the maximum piece end which can mill is 12001500mm, and takes the advantage of con- venience,
Main functions and features
This series of end cutters are composed of worktable, turnover mechanism and electric control system, which are employed for torch cutting end faces and bevels of en
galvanized stainless steel sheet
Specifications:
1.Mateial: 304L stainless steel 2. Standard:ASTM, AISI, DIN, EN, JIS 3. best price 4. hot sale in s
Main functions and features
This chamfering machine employs the principle of rolling shear to shear the edge of the steel plate according to the angel needed, to obtain the bevel for welding. W
Self Regulating
Heat Tracing Cable
Specifications
1.Low strating
current about 0.4A/m
2.Self regulating
output according to temperature
3.Heating cable
for pipe prote
Introduction
Thermal oil heater( electric thermal oil heater ) has advantages of stable
heating performance, good heat transfer performance, low vapor pressure.As the
heat-conducting oil possesses
Main functions and features
This machine can provide one-time milling and shaping for the beveling of bevel edge, straight edge, U edge before metal plate welding. Compared with edge planer, it has
Specifications
304 316 430 hot rolled stainless steel coil
1.width:1000mm-3500mm
2.OD:0.3mm-100mm
Details of product