Адрес: No.144, Ali Shan Road, ETDZ, Qingdao, China
Телефон: +86-532-86803518
.
Rubber sheeting mill is chiefly used as accessory of internal mixers to make rubber sheets.
The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface.
The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable.
The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.
The base frame is a complete framework, which is convenient for installation.
NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings.
Model
XKY-550
XKY-660
XKY-710
1,Working diameter of rolls mm
550
660
710
2,Working length of rolls mm
1500
2130
2200
3,Working linear speed of front roll m/min
31.17
22-7
30.26
4,Friction ratio of front and rear roll
1:1.09
1-24
1:1.51
5,Capacity per batch
(mix-up stock) kg
540kg/h
165
190
6,Driven motor power kw
110
180
280
7,Overall dimensions mm
L
5870
5900
7650
9120
W
2420
3460
3850
H
2562
2535
2720
2930
8,Weight t
~28
~49
~59
Silicone rubber extruder are mainly used to extrude silicone rubber profile, hoses, etc.
Model
Screw diamete
silicone rubber extrusion and vulcanization production line ,used for silicone rubber profile ,hoses, etc.
Model
Auto Push-out Mould Hydraulic Press is four columns structure, including main machine, hydraulic station, pc controling three parts. It achieve mould put in-auto rising-auto release-reach pressur
cold feed rubber extruder
1. cold feed rubber extruder is used to tread crowded system, inner tube, cushion belt, rubber hose ect. Semi-finished products, also can be used for cable with gl
Model
Size of heating plate LxW(mm)
Width of rubber belt to be joined-up(mm)
Total Power(KW)
Weight of heaviest part(Kg)
Overall dimensions LxWxH(mm)
Total weight(kg)
Duplex vulcanizing press is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products. Being a column structure and downward pressing type, the heati
Dynamic Devulcanizer adopts a new technology of devulcanizition. Compared with tradtional devulcanizing equipments, it is advanced in the following points.
The reclaim powder does not need to be g
EVA Foam Kneader is a new and high-tech equipment developed for the mixing of high-power or low-power foaming plastics and for the foaming of rubber and plastics products.
Specifications:3L-200
Hard tooth type rubber mixing mill is used for the rubber compounding and sheeting
1. The rolls are made of chilled cast iron. The roll surface is hard and wearable. The internal cavity is processed