IntroductionIt is made up by acrylate emulsion cement and inorganic materials, which is classified in typeⅠand type Ⅱ according its function. Features 1.Environmental protection, innocuity, harmless, safe.2.High bonding strength.3.Weather resisting property.4.Water resisting property.5.Ageing resistance.6.No flowing. Scope of applicationTypeⅠ suits for dry and non long-term immersion environment,e.g.Roof and so on.Type Ⅱ suits for long-term immersion environment,e.g.washroom and hypogge. Remarks1)If it is used in underground constructions, this can be ignored.2)If it is used in underground waterproofing constructions, this item must be tested. Key points for construction Base requirementsThe waterproof base must be cleaned to ensure strong, dry, and smooth.Where there is rugged construction, it should be smooth or rubdown,corners and interior angles are required to be prior round. Coat base additives all surfaces of the constructions.Wait until it is completely dry. First coatTypeⅠ liquid : powder: water =1:1.2:0.6(weight ratio)TypeⅡ liquid : powder: water=1:1.5:0.8 (weight ratio)Use motor stirrer and mix them up until smooth before construction. CoatingTypeⅠ liquid : powder: water =1:1.2(weight ratio)TypeⅡ liquid : powder: water=1:1.5 (weight ratio)Add the power into liquid slowly and start the motor stirrer (350-450 rotations per min) to mix them up until smooth abour 3~5min. Construction points Use roll brush or scraper blade for several times. The coatings should not too thick or it will dry too long. The protective cover should proceed after the coating is dry(5-7days at room temperature) Appearance The liquid is milky white liquid glue, and the power has two colors,white and black. Packing specificationsTypeⅠ20kg liquid+24kg powderTypeⅡ 20kg liquid+30kg powder Reference dosageWhen the film is 1.0 mm, the dosage is aboutTypeⅠ1.9g/m2TypeⅡ1.85g/m2(the dosage is the powder and the liquid’s gross) Storage and TransportThe storage temperature should be below 5°CAvoid raining, insolation, squeezing, collidingStorage period: one year
IntroductionIt is made by bitumen that added styrene, butadiene, styrene, TPE as modified materials, with special process to compound high polymer modified bitumen. Main performance1.Good low tem
Product mechanismThe reaction mechanism of Weigu 929 is that the NCO end group of the PUP touches air or the tidal air of the basement layer that they solidify into films, it can construct in moist ba
Product introductionPSA self-adhesive reactive cementation high polymer waterproof membrane (APF-3000) is researched and developed by Keshun Company, it is the promotion project of (MOC) Ministry of C
Butyl rubber sealing tape is a kind of adhesive sealing material that made up of butyl rubbe.it has well adhesiveness and ageing resistance. It is suitable for internal seal of car, wheel, large scale
Butyl rubber tape for sound insulation and damping which made from butyl rubber as main material and supplemented by other additives, by processing and becomes a sound insulation
Butyl rubber tape is made up of butyl rubber, polyisobutene and other raw materials according to special formula and the latest patented technology, the high polymer materials were all imported and th
IntroductionIt is made from SBS and high polymer modified asphalt with latest modified technique, this craft makes the asphalt particles disperse evenly in the aqueous solution with emulgator, which a
Insulation waterproofing butyl rubber tape is specially designed for power cable and communication cable. It is made from butyl rubber and EPR as cable sealing tape that has well insulativity and wate
Так же в категории "Прочие материалы для ремонта и строительства":
помощь**
Добавить в избранное
Отложенные товары
