English German French    |    помощь**
   Добавить в избранное    Отложенные товары
   
 

Описание товара
Полезные ископаемые и прочее сырье /  Железо и сталь / 
Отправить запрос

подробнее об услуге

Информация о производителе
Компания:
Aster Teleservices (P) Ltd
 
Адрес:
3rd Floor Laxmi Towers, Plot No. 10 G-Block Colony, Dr A. S Rao Nagar, Hyderabad, Andhra Pradesh, India
 
Телефон:
+91-040-27162534

.

Self Supporting TowerSelf-supporting towers are supported on ground or on building and they act as cantilever trusses in carrying the wind and seismic loads. Though the weight of these towers is more they require less base area and are suitable in many situations. Most of the TV, MW, Power transmission, and flood light towers are self-supporting towers.Steel towers can be constructed in number of ways but most efficient use of material is achieved by using open steel lattice. The typical arrangement for microwave tower is shown in the figure. The use of an open lattice avoids presenting the full width of structure to the wind but enables the construction of extremely light in weight and stiff structures. Most of the power transmission, telecommunication and broadcasting structures are lattice structures.Aster offers the following Self Supporting Towers: -1 Based on cross section of towerSquare towersRectangular towersTriangular towersDelta towers2. Based on type of material sectionsAngular towersHybrid towers (Legs tubes and bracings angles)3. Based on placement of towerGreen Field TowerRoof Top TowerSelf Supporting TowerSelf-supporting towers are supported on ground or on building and they act as cantilever trusses in carrying the wind and seismic loads. Though the weight of these towers is more they require less base area and are suitable in many situations. Most of the TV, MW, Power transmission, and flood light towers are self-supporting towers.Steel towers can be constructed in number of ways but most efficient use of material is achieved by using open steel lattice. The typical arrangement for microwave tower is shown in the figure. The use of an open lattice avoids presenting the full width of structure to the wind but enables the construction of extremely light in weight and stiff structures. Most of the power transmission, telecommunication and broadcasting structures are lattice structures.Aster offers the following Self Supporting Towers: -1 Based on cross section of towerSquare towersRectangular towersTriangular towersDelta towers2. Based on type of material sectionsAngular towersHybrid towers (Legs tubes and bracings angles)3. Based on placement of towerGreen Field TowerRoof Top TowerGuyed TowerGuyed Tower provide height at a much lower material cost than self-supporting towers due to the efficient use of high strength steel in the guys. Guyed towers are normally guyed in three directions over an anchor radius of typically 2 / 3 of the tower height and have a triangular lattice section for the central mast. Tubular masts are also used, especially where icing is very heavy and lattice sections would ice up fully.These towers are much lighter than self-supporting type but require a large free space to anchor guy wires. Whenever large open space is available, guyed towers are provided. There are other restrictions to mount dish antennae on these towers and require large anchor blocks to hold the ropes.
ОтложитьОтложить товар сайт производителяСайт производителя
336x280 banner
336x280 banner
Другие товары этого производителя :
Self Supporting Towers
 Self Supporting Towers (Self Supporting Towers)
Self Supporting TowerSelf-supporting towers are supported on ground or on building and they act as cantilever trusses in carrying the wind and seismic loads. Though the weight of these towers is more

Так же в категории "Железо и сталь":
 Color Glazed Dinner Set
Цвет ...
 Color Glazed Dinner Set
Цвет ...
 F Steel Bar and Angle Steel
F-бар ...
 Galvanized Wire
Оцинк...
 Hot Rolled Steel Plates & Coils
Горяч...
 Tungsten Carbide Ball
Карби...
 
Copyright © 2006 - 2010 Asia.ru
 
eHouseHolding.com