Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Raw Materials /  Iron & Steel / 
Send Request

about this service

Producer information
Company:
Dongguan Yagang Metal Materials Co.,Ltd
 
Address:
No.35 South Xingfa Road, Wusha Community, Changan Town
 
Phone:
+86-769-81502782

D2/1.2379 die steel bar


D2/1.2379 DIE STEEL BAR D2/1.2379 is an air hardening (cold work) tool steel that is high in carbon and chromium. D2/1.2379 offers excellent resistant to wear and abrasion and is used in long-run application when resistance to wear is required. D2 is machinable in the annealed condition. D2 shows minimal distortion during heat treatment. D2/1.2379 has a machinability rating of 35% to 40% of a 1% carbon tool steel. D2/1.2379 is sold in the annealed condition. Typical annealed hardness is BHN 217/229 Rc 17/18. D2/1.2379 maximum working hardness is BHN 710 Rc 63. D2/1.2379 is capable of meeting ASTM-A681. Typical Applications: Stamping Dies Forming Rolls Forming Dies Punches/Dies Trim Dies Label Dies Wear Plates Chemical Composition: Carbon: 1.40~1.60% Silicon: ≤0.60% Manganese: ≤0.60% Chromium: 11.0~13.0% Molybdenum: 0.70~1.20% Vanadium: ≤1.10%

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
D3/1.2080 tool steel flat bar
D3/1.2080 tool steel flat bar (D3/1.2080 tool steel flat bar)
1.2080/Cr12/D3/Cr8/Cr10 cold work tool steel flat bar 1. Chemical composition: C 2.0~2.3 Si≤0.40 Mn≤0.40 Cr11.50~13.00 P≤0.030 S≤0.030 2. Delivery condition: Hot rolled o
D5/Cr12MoV tool steel forged steel bar
D5/Cr12MoV tool steel forged steel bar (D5/Cr12MoV tool steel forged steel bar)
1) Delivery condition : hot rooled or forging. EAF or ESR material ; 2) Surface : black or machined surface . 3) Annealing hardness : HBS=207-255; 4)Compared steel : D5(USA AISI) , Cr12
DIN1.2738 Mould steel
DIN1.2738 Mould steel (DIN1.2738 Mould steel)
DIN1.2738 Mould steel DIN1.2738has good mechanical property and quenching ,, after deal with it , it will be made the surface have equal surface ,. DIN1.2738 has nice polishing
H11/1.2343 hot work alloy tool steel
H11/1.2343 hot work alloy tool steel (H11/1.2343 hot work alloy tool steel)
1.2343/H11 ALLOY TOOL STEEL 1. Grade: AISI:H11/ASTM:H11/JIS:SKD6/DIN:1.2343/GB: 4Cr5MoSiV 2. Specification: Diameter/Thickness: 20~600mm or as customers’ requires
H13/1.2344 hot work tool steel
H13/1.2344 hot work tool steel (H13/1.2344 hot work tool steel)
H13/1.2344/SKD61 HOT WORK TOOL STEELSpecificationsChemical Composition ELEMENTMIN.MAX.CARBON0.370.42MANGANESE0.200.50PHOSPHORUS00.025SULFUR00.005SILICON0.801.20CHROMIUM5.005.50VANADIUM0.801.20MOLYBDEN
H21 Hot work steel
H21 Hot work steel (H21 Hot work steel)
H21 Hot work steel 1)Delivery condition :Hot rolled or forging ,ESRor EAF material ,black or machined surface 2)Comparable steel : 3Cr2W8V (GB), H21 (AISI) ,1.2581 (DIN ), SKD5(JIS )
NAK80 steel round bar
NAK80  steel round bar (NAK80  steel round bar)
Forged Steel NAK80 1Ni3Mn2CuAlMo / NAK80 is low allloy separate out induration steel . it has good machanical property after the heat-treatment . 1Ni3Mn2CuAlMo / NAK80 is high quenchi
O1/1.2510 oil tool steel
O1/1.2510 oil tool steel (O1/1.2510 oil tool steel)
AISI O1(DIN 1.2510, GB 9CrWMn,JIS SKS3) OIL TOOL STEEL 1. Chemical composition: C=0.85~0.95, Si=0.20~0.40, Mn=1.00~1.30, Cr=0.40~0.60, W=0.40~0.60, V=0.10~0.20.2. Delivery condition: EAF or ESR,
P20+Ni Mould steel
P20+Ni Mould steel (P20+Ni Mould steel)
1. Grade: P20+Ni/718/1.2738 steel block 2. Specification: T200~800*W400~1000*L1500~5800mm 3. Delivery condition: Forging, machined surface 4. Chemical composition(for refere

Likewise in category "Iron & Steel":
 Glass Cruet Set with Wire Stand
Glass Cru...
 Color Glazed Ceramic Bowl
Color Gla...
 Color Glazed Dinner Set
Color Gla...
 Glass Salad Bowl Set
Glass Sal...
 Ceramic Coffee Set with Wire Stand
Ceramic C...
 F Profile Steel Angle Steel
F Profile...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com