16F+2G high-performance smart Layer 2 optical Ethernet switch provides an ideal solution for fiber-to-the-home (FTTH) and fiber-to-the-desk (FTTD), and for the applications where the environmental conditions exceed the reach of CAT5 copper cable. It offers sixteen 100Base-FX ports, and two 10/100/1000Base-TX or optional SFP 1000Base-X ports for flexibility and fast connection speeds. It is with a 19-inch rack-mount width and a 1U height standard design. 16F+2G manual-driven configuration console allows administrators to easily setup the switch using a standard RS-232 port. Features ■Non-blocking store-and-forward shared-memory architecture with an 8.8Gbps switching capacity and an efficient self-learning and address recognition mechanism enables the forwarding rate to proceed at a full wire speed. ■6K address table for auto-learned unicast or static unicast/multicast addresses. ■7 trunk groups of up to 4 member ports within 18 ports with flexible load distribution control and fail-over function. ■Static priority and 802.1p Class of Service with 2-level priority. ■802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode. ■Port-based VLAN and 802.1Q tag-based VLAN with 255 VLAN groups. ■Head of Line (HOL) blocking prevention. ■By-port Egress/Ingress bandwidth management control. ■Broadcast storm filtering. Network Management ■Out of Band: RS-232 Console. Network Protocol and Standards ■IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.1p, 802.1q, 802.3ad, 802.3x Port Configuration ■Gigabit ports: two 10/100/1000Base-TX RJ45 ports or two optional SFP 1000Base-X LC ports. ■Sixteen 100Base-FX SC/PC ports Optical Interface Options ■1000Base-X ■Dual multimode fiber (50/125μm), single wavelength 850nm, dual LC connectors, operating distance 550m. ■Dual multimode fiber (62.5/125μm), single wavelength 850nm, dual LC connectors, operating distance 275m. ■Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual LC connectors, operating distance 15/40/60km. ■100Base-FX ■Single single-mode fiber, dual wavelength 1550nm/1310nm, SC/PC connector, operating distance 15/40/60km. ■Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC connectors, operating distance 15/40/60km. ■Dual multimode fiber, single wavelength 1310nm, dual SC connectors, operating distance 2km. Power Supply Options ■AC90~264V/1.2A max, 50/60Hz, ■Power Consumption:
24F+2G high-performance smart Layer 2 optical Ethernet switch provides an ideal solution for fiber-to-the-home (FTTH) and fiber-to-the-desk (FTTD), and for the applications where the environment
The VP608 has 4 1000Mbps fiber optic ports with optional SFP module and 16 10/100Mbps electrical ports, which is designed to meet various industrial application needs, and provides customer with a
1. Introduction: New Air intelligent controller (KF-800E) can monitor real-time indoor temperature, humidity, VOC concentration. Built-in air quality sensor can monitor ammonia, fo
help
Add to favorite
Favorite products
