Russian

German

French |

help

Add to favorite

Favorite products

Description

Chemical Materials & Products / Adhesive Materials /

silicone potting sealant for LED/LCD (заливки силиконовый герметик для LED / LCD)

Zoom in

Send Request

about this service

Producer information

Company:
Guangzhou Usilicone chemical material Co.,Ltd

Address:
Room 1206, Science Avenue 97, Luogang District

Phone:
+86-769-88888312

silicone potting sealant for LED/LCD

Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min) (Adjustable)Curing Time3～5(h)After The Curing Hardness 40~50(Shore A)Dielectric Strength ≥20(kV/mm)Dielectric Constant3.12(1.2MHz)Thermal Conductivity ≥0.6[W/m.k]Volume Resistivity ≥1.0×1014(Ω·cm)Specific Gravity 1.56±0.02(g/cm3)Flammability RatingUL94 V-0 •20kg/set（A10kg+B10kg), packaging with bucket.

Add to Basket

Web address

Other goods of this manufacturer :

silicone potting sealant with waterproof
	Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500～2500(cps)1500～2500(cps)A:B 1:1Mixed Viscosity 1500～2500(cps)Operable Time30～120(min)

Silicone Rubber Product Customization
	With the development of silicone rubber, the application range also rapidly development. The silicone rubber market is very optimistic in the future, because silicone rubber is a young peri

silicone sealant for solar power
	Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Stren

silicone sealant with good anti-aging
	Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Stren

silicone sealant with insulation
	Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Stren

silicone sealant with non-corrosion for many metal
	1. Features ZS-GF-D906W is one kinds of the one-component alcohol silicone sealant which is room temperature curing. This product is a kind of special sealant for sola

silicone sealant with non-corrosion for PC
	Before The Curing Appearance Translucent And Half FlowRelative Density0.95～1.05 (g/cm3)Tack Free Time ≤90 (min)Completely Cure Time3～7(d)After the curing

silicone sealant with special appearance
	NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it

silicone sealant with special appearance
	Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s，25℃)Cure Time 3～7(d)After the curing Relative Density1.40～1.45 (g/cm3)Tensile Stren

Likewise in category "Adhesive Materials":

Taiwan.ru service usage rules

eHouseHolding.com