|
silicone sealant with special appearance
|
|
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it
|
| |
silicone sealant with special appearance
|
|
Before The Curing AppearanceWhite PasteTack Free Time≤10 (min)Extrudability 5~11 (g/s,25℃)Cure Time 3~7(d)After the curing Relative Density1.40~1.45 (g/cm3)Tensile Stren
|
| |
waterproof silicone sealant
|
|
1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
|
|
|
functional silicone potting sealant
|
|
Before The CuringPerformance Indicators ABAppearanceGray FluidWhite FluidViscosity 1500~2500(cps)1500~2500(cps)A:B 1:1Mixed Viscosity 1500~2500(cps)Operable Time30~120(min)
|
| |
damp-proof silicone sealant
|
|
1. Features ZS-NJ-D939C is one kind of the one-component dealcoholized silicone sealant at room temperature curing with medium viscosity. This product has the properti
|
| |
good adhesive performance silicone sealant
|
|
Before the curingAppearanceWhite pasteRelative density1.60~1.70(g/cm3)Surface drying time≤15(min)After the curingTensile strength≥1.5(MPa) Elongation At Break≥150(%)Shear strength&
|
|
|
good adhesive silicone sealant for LED
|
|
INSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so
|
| |
good adhesive silicone sealant for LED
|
|
METHOD OF OPERATIONINSTRUCTIONS1、Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.2、After sizing: Unscrew the hose cap (or cutting), squeezing the glue on
|
| |
good adhesive silicone sealant for LED
|
|
Before The Curing Appearance Semi Transparent And Semi FlowSpecific Gravity0.95~1.05 (g/cm3)Surface Drying Time ≤15 (min)Curing Time 3~7 daysAfter The CuringTensi
|
|