Address: 21-12, Lung Hsing Lane, Fong Hsing Rd., Sec. 2, Tan Tze Hsiang, Taichung Hsien
Phone: +886-4-25361143
9-Pincer Computerized Toe Lasting Machine (with Hot melt)
2. The PLC system is equipped with the touch screen to operate the machine with the graphical symbols.3. The setting of the parameters (time and stroke) are by numerical key in, with the protection of the key switch to avoid the reading or changing by the non-authorized.4. Up to 100 different shoe models are programmable and memorable with the parameters and the pincers’ position, and also with the five steps quick adjustable for the width of the pincer plate.5. Error diagnostic readable on the monitor.6. The movement of the pincer plates are operated by the electric motor, and with the combine of the double point adjustment design, the left and right pincer plate can be adjusted separately.7. The first pincer can be adjusted with the 15 degrees swing angle left or right, and the actual angle will be displayed in the screen.
This machine is used for the lasting operation of the upper’s forepart, and equipped with the applicator. The rod cement of polyester or polyamide is designed for using, which ensures higher fle
Controlled by PLC 100 sets of memory The new patent turing pincer system(patent no.86206459) The 2-step adjusted adhesive applicator The last support plated and adhesive applicator is easily adjusted
1.The last support plate is functioned with two-stage rising mechanism. 2.The mechanism of toe part pressing pad adopts adjustable 2-stage pressure. 3.Each set of pincers has the function of independe
1.The last support plate is functioned with two-stage rising mechanism. 2.The mechanism of toe part pressing pad adopts adjustable 2-stage pressure. 3.The rapid installing and releasing structure for
Owing the high efficiency precision machining equipment and softweare, such as Cincinnati 5-axix Gantry Profile, CATIA, CAD/CAM system,..... etc. The nation-level calibration and laboratory center and
Owing the high efficiency precision machining equipment and softweare, such as Cincinnati 5-axix Gantry Profile, CATIA, CAD/CAM system,..... etc. The nation-level calibration and laboratory center an
Owing the high efficiency precision machining equipment and softweare, such as Cincinnati 5-axix Gantry Profile, CATIA, CAD/CAM system,..... etc. The nation-level calibration and laboratory center and
1.This machine is used for the lasting operation of the upper’s side and heel part in one operation, and equipped with two floating nozzles. The rod cement of polyester or polyamide is designed
1.This machine works with the simultaneous actions of side cementing and heel tacking. 2.The heel lasting wiper and tacking seat are combined in the same body, acting simultaneously and electrically a
help
Add to favorite
Favorite products
