Address: Xianhe Village, Xuelang Town, Wuxi, Jiangsu, China (Mainland)
Phone: +86-510-85190710
Spraying-Filler Deaerator
The inlet water (condensed water and feed water) of the deaerator will go through the stainless steel spring nozzle, which can spray the inlet water into mist shape and get heated by the steam from the lower to upper part, thus achieving primary deoxidization. Washing disc and feeding layer are installed on the bottom, so that water can flow to the feeding layer through the multi-hole plate after dispersing on the disc. Heating steam vent is set on the feeding layer or water tank, which allows the steam enter the feeding layer and accomplishes in-depth deoxidization.The feeding has very good heat transfer and mass transfer performance; on the other hand, water will fall to the tank via the central pipe. Re-boiling device is installed on the water tank and water absorbed through the jet of the steam will enter the nozzle mixed pipe for heat exchanging before spraying to the water. In this way, water recycling will be formed around the nozzle, and also the steam and water mixing can be made, by which the oxygen and other gas in the water will come to the water surface, accelerating the oxygen diffusion.
Submerged scraper conveyor is used for the continuous conveyance of conventional coal dust boiler ash, and especially for the places with limited water volume and clearance height. Submerged scraper c
Submerged scraper conveyor is used for the continuous conveyance of conventionalcoal dust boiler ash, and especially for the places with limited water volume andclearance height. Submerged scraper con
Water-water heat exchanger consists of front water chamber, pipe, canister and back water chamber. The heat exchanging tubes are connected by tenacity expansion and seal welding. An anti-dashing board
Water-water heat exchanger consists of front water chamber, pipe, canister and back water chamber. The heat exchanging tubes are connected by tenacity expansion and seal welding. An anti-dashing board
Adjustment baffle flap is designed into a solid welded structure punched by steel sheet and consists of five components, such as external framework, baffle vanes, bearing, axis sealing mechanism and b
Adjustment baffle flap is designed into a solid welded structure punched by steel sheet and consists of five components, such as external framework, baffle vanes, bearing, axis sealing mechanism and b
Boiler Start-Up Drain Flash Vessel is used to receive the max. trapped water amount during boiler start up and other trapped water discharge from the boiler scope, including superheated trapped water,
Boiler Start-Up Drain Flash Vessel is used to receive the max. trapped water amount during boiler start up and other trapped water discharge from the boiler scope, including superheated trapped water,
Since 90th, many companies have followed up foreign experiences by changing the original radius coarse powder separator to axis coarse powder separator. The tremendous increase of the height and volum
Likewise in category "Hydraulic and Pneumatic Components":
help
Add to favorite
Favorite products
