Address: Xianhe Village, Xuelang Town, Wuxi, Jiangsu, China (Mainland)
Phone: +86-510-85190710
Shut-off Baffle Flap
Shut-off baffle flap is in solid welded structure punched by steel plates and consists of six components, such as external framework, baffle vane, sealing sheet, bearing, bearing seal and baffle linking part.The vane is made of 16 Mn solid wear-resistant steel assembled by punching. The lozenge vane and transmission axis are firmly linked with bolt or conic pin. Both the framework and baffle vane have sufficient strength and rigidity. Stainless elastic sealing sheet with a thickness of 0.6-1mm is embedded in the surroundings and in between each baffle inside the frame that is sealed by the air pressure difference between the two sides of flap. The front bearing of the baffle is a non-lubricated and high-temperature resistant hub-adjusting bear. All baffle axes are extended outside the frame and connected with linking part. One of the driving axes links the driving unit and sets it in full-open and full-close rotation up to 90 degree. The flap and the pipe can be connected with counter-flange bolt or seal welded after the pipe is inserted into the flap.
Shut-off baffle flap is in solid welded structure punched by steel plates and consists of six components, such as external framework, baffle vane, sealing sheet, bearing, bearing seal and baffle linki
Shut-off baffle flap is in solid welded structure punched by steel plates and consists of six components, such as external framework, baffle vane, sealing sheet, bearing, bearing seal and baffle linki
The inlet water (condensed water and feed water) of the deaerator will go through the stainless steel spring nozzle, which can spray the inlet water into mist shape and get heated by the steam from th
The inlet water (condensed water and feed water) of the deaerator will go through the stainless steel spring nozzle, which can spray the inlet water into mist shape and get heated by the steam from th
Submerged scraper conveyor is used for the continuous conveyance of conventional coal dust boiler ash, and especially for the places with limited water volume and clearance height. Submerged scraper c
Submerged scraper conveyor is used for the continuous conveyance of conventionalcoal dust boiler ash, and especially for the places with limited water volume andclearance height. Submerged scraper con
Water-water heat exchanger consists of front water chamber, pipe, canister and back water chamber. The heat exchanging tubes are connected by tenacity expansion and seal welding. An anti-dashing board
Water-water heat exchanger consists of front water chamber, pipe, canister and back water chamber. The heat exchanging tubes are connected by tenacity expansion and seal welding. An anti-dashing board
Adjustment baffle flap is designed into a solid welded structure punched by steel sheet and consists of five components, such as external framework, baffle vanes, bearing, axis sealing mechanism and b
help
Add to favorite
Favorite products
