Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Industrial Equipment /  Metalworking Equipment /  Metal Cutting Machinery / 
Send Request

about this service

Producer information
Company:
UPTOOL SERVICE LIMITED
 
Address:
1F. No.20 Alley 47 Lane 208 Ruey An St. Taipei
 
Phone:
+886-2-27088333

HTC


STANDARD CAPACITY ~ 25-550 mm diameter range I.D. ~ 600 mm maximum workpiece O.D. ~ Standard holding fixture 50-400 mm O.D. ~ Optional holding fixture 350-600 mm O.D. SPINDLE ~ 5,5kW ~ 3 speed ranges manually adjusted 10 - 350 RPM ~ Computer controlled overload protection system set at operator interface STROKE MOVEMENT ~ 4,2 kW serve drive ~ 1 to 40 metres per minute stroke rate adjustable in 1 m/min increments through operator interface. Also adjustable during cycle ~ Dwell and oscillation feature FEED SYSTEM ~ 1 kW serve drive ~ IPC control ~ Zero shutoff ~ Auto retract at end of cycle. Auto rapid expansion at beginning of cycle ~ Spark out ~ Tool selection menu from operator interface ~ Automatic geometry correction ~ Taper hone option (special hone head required) ~ Automatic stone wear compensation CONTROL ~ IPC controlled (Industrial PC, Operating System DOS) ~ Languages English/German (other languages available) 38 litres/min, flow rate HTC-2000 to HTC-4000 50 litres/min, flow rate HTC-5000 to HTC-10000 Magnetic separator (cleaning rate 70 %) 300 litre reservoir HTC-2000 to HTC-4000 500 litre reservoir HTC-5000 to HTC-10000 Auto/manual start of the coolant GENERAL Compressed air: 30 litre per minute at 6 bar Electrical system: 400 volt; 50 Hz; 3-phase (other voltages/frequencies applicable) Colour: Grey RAL 9002/RAL 7043 Light Barrier CE Certification OPTIONAL EQUIPMENT ~ HT-350 workholding fixture for O.D. range 350 - 600 mm ~ PF-400 Filter unit with paper cartrige filter elements for non ferrous application or very fine surface finish requirements ~ lPG-50 In process gaging system for I.D. 25 - 230 mm ~ Special worktables for extra large O.D. ~ Centrifugal filtration system with cooler for high production ~ Alternative machine colours ~ 500 litre reservoir HTC-2000 to HTC-4000 ~ Special applications can be addressed as required

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
MBB-1660Basic Honing Machine
MBB-1660Basic Honing Machine (MBB-1660Basic Honing Machine)
Put the MBB-1660 in your shop and youre ready for any kind of l.D. work.from half a dozen pieces to several hundred. ln most cases. the MBB-1660 pays for itself in just a few jobs. KEY FEATURES 1 Han
MBB-1660Basic Honing Machine
MBB-1660Basic Honing Machine (MBB-1660Basic Honing Machine)
Put the MBB-1660 in your shop and youre ready for any kind of l.D. work.from half a dozen pieces to several hundred. ln most cases. the MBB-1660 pays for itself in just a few jobs. KEY FEATURES 1 Han
MBB-1660Basic Honing Machine
MBB-1660Basic Honing Machine (MBB-1660Basic Honing Machine)
Put the MBB-1660 in your shop and youre ready for any kind of l.D. work.from half a dozen pieces to several hundred. ln most cases. the MBB-1660 pays for itself in just a few jobs. KEY FEATURES 1 Han
PG-800 q
PG-800  q (PG-800  q)
Sunnen PG-SERIES BORE GAGING SYSTEM
PG-800 q
PG-800  q (PG-800  q)
Sunnen PG-SERIES BORE GAGING SYSTEM
PG-800 q
PG-800  q (PG-800  q)
Sunnen PG-SERIES BORE GAGING SYSTEM
SUNNEN SV3 and SV4 SERLES
SUNNEN SV3 and SV4 SERLES (SUNNEN SV3 and SV4 SERLES)
Digital Control Ensures Precision Performance The PLC System Control incorporated into the SV Series ensures quick setup and operation. The system stores up to 99 part setups which you can retrieve a
SUNNEN SV3 and SV4 SERLES
SUNNEN SV3 and SV4 SERLES (SUNNEN SV3 and SV4 SERLES)
Digital Control Ensures Precision Performance The PLC System Control incorporated into the SV Series ensures quick setup and operation. The system stores up to 99 part setups which you can retrieve a
SUNNEN SV3 and SV4 SERLES
SUNNEN SV3 and SV4 SERLES (SUNNEN SV3 and SV4 SERLES)
Digital Control Ensures Precision Performance The PLC System Control incorporated into the SV Series ensures quick setup and operation. The system stores up to 99 part setups which you can retrieve a

Likewise in category "Metal Cutting Machinery":
Compound Type of Table Lathe/ Mini Milling Machine
Compound T...
Brass Wire,EDM Wire,Cutting Wire,Wire Manufacturing, Mold Cutting,CNC Wire Cutti
Brass Wire...
Brass Wire,EDM Wire,Cutting Wire,Wire Manufacturing, Mold Cutting,CNC Wire Cutti
Brass Wire...
HONING OILS
HONING OIL...
Saddle of CNC Machine Center
Saddle of ...
Bed of CNC Machine Center
Bed of CNC...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com